Free reverse phone lookup google

Hello GSM Friends Chek this Secret code for oppo mobiles I hope its usefull for you ,



GSM codes for OPPO R5
Change PIN PIN code or Personal identification number, numeric password to authenticate a user of an ATM or credit card. If you suspect that your handset has become blocked, you may need a PUK Code. PUK stands for Personal Unblocking Key. If you have entered your PIN code incorrectly 3 times your sim card will be blocked and you will be unable to make and receive calls/texts. - ** 04 *, then enter the PIN old, and twice a new PIN.
Change PIN2 - ** 042 *, then enter the old The PIN2, and twice the new PIN2.
Unlock SIM-card (PIN) - ** 05 * then enter the PUK and new PIN twice
Unlock SIM-card (PIN2) - ** 052 *, then enter the PUK2 and new PIN2 twice
Call Forwarding (you have to order the service from the operator)
##002# - Cancel all diverts
##004# - Cancel all conditional call forwarding
**004* phone number # - Activate all conditional call forwarding
Unconditional call forwarding (Call Forward All)
###21 - Switch off and deactivate
#21# - Deactivate
**21*phone number# - Enable and Activate
*21# - Activate
*#21# - Check the condition
Diversion in case of "no answer"
###61 - Switch off and deactivate
#61# - Deactivate
**61* phone number# - Enable and Activate
*61# - Activate
*#61# - Check the condition

Setting the call time until the call forwarding option "no answer"
When installing forwarding on "no answer" you can set the time in seconds that the system allows you to hook. If during this time you have not picked up the phone, the incoming call will be diverted.
Example: - ** 61 * + ** 709576617601234 # 30 - set the waiting time of 30 seconds
Set timeout - ** 61 * Phone Number ** N #, N = 5..30 (seconds)
Remove the previous installation - ## 61 #
Diversion in case of "not available"
# ## 62 - Switch off and deactivate
# 62 # - Deactivate
** 62 *phone number# - Enable and Activate
* 62 # - Activate
* # 62 # - Check the condition

Diversion in case of "busy"
###67 - Switch off and deactivate
#67# - Deactivate
**67*phone number# - Enable and Activate
*67# - Activate
*#67# - Check the condition
Call Barring (you have to order the service from the operator)
Change the password for all bans (default - 0000)
- ** 03 * 330 * old password * new password * new password #
Barring of all outgoing calls
**33*password# - Activate
#33*password# - Deactivate
*#33# - Check the condition
Barring of all calls

**330*password# - Activate
#330*password# - Deactivate
*#330# - Check the condition
Barring of all outgoing international calls
**331*password# - Activate
#331*password# - Deactivate
*#331# - Check the condition
Barring of all outgoing calls
**333*password# - Activate
#333*password# - Deactivate
*#333# - Check the condition
Barring of all incoming calls
**353*password# - Activate
#353*password# - Deactivate
*#353# - Check the condition
Barring all incoming calls when roaming
**351*password# - Activate
#351*password# - Deactivate
*#351# - Check the condition

Call waiting (you have to order the service from the operator)
*43# - Activate
#43# - Deactivate
*#43# - Check the condition
Transfer your phone number (Anti ANI)
#30#phone number - Block
*30#phone number - Allow
*#30# - Check the condition
Show phone number of the caller you (ANI)
#77# - Block
*77# - Allow
*#77# - Check the condition
Smart menu
GP - *111#
Rob - *140#

Other hidden code latest F1S.
entering *#8778# will result an immediate factory reset! - See more at:
*#800# � Enter engineering mode
*#801# � Engineering switch test mode (dangerous)
*#802# � enter automatically engineering TTFF GPS test mode
*#803# � enter engineering network test mode
*#804# � automatic disconnect test mode
*#805# � engineering Bluetooth test mode
*#806# � engineering aging test mode
*#807# � enter engineering test mode
*#808# � enter manual engineering test mode
*#809# � enter engineering echo test mode
*#888# � view hardware pcb version
*#900# � test photograph RGB
*#06# � view this machine mobile communication international recognition id
*#99# � screen lights long bright
*#6776# � machine info
*#1234# � view software details
`
*#36446337# � test function instruction
Finally *#1234# will show your firmware version number.

The era of the Tudors was one of danger, intrigue, conspiracy, and, above all, spies. The summer of 1553 is a time of danger and deceit. Brendan Prescott, an orphan, has been reared in the household of the powerful Dudley family. Brought to court, Prescott finds himself sent on an illicit mission to the king’s brilliant but enigmatic sister, Princess Elizabeth. But Brendan is soon compelled to work as a double agent by Elizabeth’s protector, William Cecil, who promises in exchange to help him unravel the secret of his own mysterious past. A dark plot swirls around Elizabeth’s quest to discover the truth about the ominous disappearance of her seriously ill brother, King Edward VI. With only a bold stable boy and an audacious lady-in-waiting at his side, Brendan plunges into a ruthless gambit of half-truths, lies, and murder.
Unabridged.
Read by Steve West.

A lot of fuss has been made about the iPhone’s lack of repairability ever since it debuted in 2007 without *gasp* a removeable battery. Six years of design updates later and the iPhone is still as hard to tinker with as ever, unless of course you work at Apple.

Yesterday, Cult of Mac revealed a few pictures of the new tools Apple created to make iPhone 5s and 5c repairs easier than ever for Geniuses. Now our tipster is back with a bunch of GIFs of Apple’s fancy new toys in action, straight from Apple’s official iPhone 5s and 5c repair training videos.

Along with detailed animations of the new iPhone 5s and 5c components, the exclusive shots below show the exact methods Apple staff use to repair broken iPhone 5s, thanks to an array of tools created to make the process more efficient, including a new Universal Display Removal Fixture and an iPhone Battery Fixture Apple keeps hidden in the back of Apple Stores.

Want to know how fix your iPhone the Apple way? Study the GIFs below and you’ll be swapping out batteries like a Genius in no time:

Universal Display Removal Fixture

Rather than use just a single suction cup and pry the display open, Apple created the Universal Display Removal Fixture to provide quicker access to the iPhone’s internals without putting components at risk in the process.

To open a device for repair Apple has mounted Universal Display Removal Fixtures with four suction cups to gently pry the display from the body.

Insert the iPhone. Plop the suction cups down. Pull the spring-loaded-lever up. Voilà! An open iPhone 5s, no prying required.


Battery Removal

iFixit’s teardown of the iPhone 5s recommends prying the battery right off its adhesive, but Apple’s official guide says you should cut the adhesive strip with scissors, and then slowly pull the adhesive out underneath the battery before using a black stick to lift it out.

Apple says to be patient when pulling out the adhesive stip, keep it tight, and just pull it all the way around the battery.

You only need to use a black stick to lift the battery out the iPhone case after the adhesive is gone. Prying the battery off the top before removing the adhesive could cause you to damage some of the internal components.

Once they remove the battery, Geniuses pick off an extra adhesive and then apply these simple adhesive strips to keep the iPhone battery in place.


Speaker Replacement

We’re told Geniuses can replace seven components on the iPhone 5s at the the store – the speaker, receiver, vibration motor, iSight camera module, battery, sim ejector tool, and the display.

Speaker replacements are pretty straightforward. Unscrew the broken component, then pop in a new one like so:


SIM Ejector Tool

You probably never think about your SIM Ejector, but it fails a lot. The fix is pretty quick though and only requires an extra set of tweezers.


iPhone Battery Fixture

To make sure Geniuses apply the perfect amount of pressure between the new battery and adhesive strips, Apple created the iPhone Battery Fixture.

The device lines up your iPhone in preparation for the pressure roller to be dropped.

Press the red lever down and the pressure roller lands gently on the new battery to make sure the adhesive keeps it firmly in place.

Slide the tray back through the vertical tower a couple times and the pressure roller secures the the battery to the new adhesive strip.

Here i am going to show you how to access the internal function of Galaxy Y Duos or android phone for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test lcd, vibration, camera, sensor (accelerometer sensor, proximity sensor, magnetic sensor), touch screen, speaker, sub key, etc... if you have any hardware problem with your galaxy y duos you can identify with this code if it is working or not to do this follow the steps below.
First of all open your keypad




Then dial the secret code *#0*# Now you get a screen with title LCD TEST and below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
To go back use right physical button
while testing the touch you have to touch and mark all the squares back button does not work
Other use full secret codes for android phone tested on galaxy y

• * #1234# to check software version of phone.
• *#12580*369# to check software and hardware information.
• *#0228# Battery status (ADC, RSSI reading)
• *#32489# Service mode
• *#7780# factory data reset galaxy y
• *2767*3855# Full factory reset (Dont dial it does not ask you to confirm unless you have problem)

These codes will work on all the models of galaxy series. 

View Samsung Galaxy Y Duos

Here i am going to show you how to access the internal function of Galaxy Grand Quattro for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test lcd, vibration, camera, sensor (accelerometer sensor, proximity sensor, magnetic sensor), touch screen, speaker, sub key, etc... if you have any hardware problem with your galaxy Grand Quattro you can identify with this code if it is working or not to do this follow the steps below.
First of all open your keypad






Then dial the secret code *#0*#. Now you get a screen with title LCD TEST and below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
To go back use right physical button
while testing the touch you have to touch and mark all the squares back button does not work
Other use full secret codes for android phone tested on galaxy Grand Quattro

• * #1234# to check software version of phone.
• *#12580*369# to check software and hardware information.
• *#0228# Battery status (ADC, RSSI reading)
• *#32489# Service mode
• *#7780# factory data reset galaxy Grand Quattro
• *2767*3855# Full factory reset (Dont dial it does not ask you to confirm unless you have problem)

These codes will work on all the models of galaxy series.

Here i am going to show you how to access the internal function of Galaxy S4 Zoom for testing the various hardware parts of your phone if it is working properly or not with the help of this secret code you can test lcd, vibration, camera, sensor (accelerometer sensor, proximity sensor, magnetic sensor), touch screen, speaker, sub key, etc... if you have any hardware problem with your galaxy S4 Zoom you can identify with this code if it is working or not to do this follow the steps below.
First of all open your keypad






Then dial the secret code *#0*#. Now you get a screen with title LCD TEST and below that you have lots of option to test various hardware parts of your phone such as speaker, sensor, lcd, etc
To go back use right physical button
while testing the touch you have to touch and mark all the squares back button does not work
Other use full secret codes for android phone tested on galaxy S4 Zoom

• * #1234# to check software version of phone.
• *#12580*369# to check software and hardware information.
• *#0228# Battery status (ADC, RSSI reading)
• *#32489# Service mode
• *#7780# factory data reset galaxy S4 Zoom
• *2767*3855# Full factory reset (Dont dial it does not ask you to confirm unless you have problem)

These codes will work on all the models of galaxy series.