Free reverse phone lookup google

However, to root your Galaxy Grand Prime, you need to install a custom recovery like TWRP using the Odin software. Odin is a Windows application specially designed for Samsung devices to perform a range of operations like install or update the stock firmware, CF-Auto-Root, install custom recovery and more. Once you install the recovery, you can then flash the SuperSU package through TWRP.

Requirements

• Make sure you have the perfect device and variant. This tutorial is suitable only for Samsung Galaxy Grand Prime SM-G530H variant.
• Make sure you have fully charged your Galaxy Note 5 or at least up to 60% of the battery.
• Enable USB Debugging on your phone.
• Make sure you have Samsung drivers installed on your PC.

Download Section

• Download | TWRP for Galaxy Grand Prime SM-G530H (File: TWRP-SMG530H.tar)
• Download | SM-G530H-Driver
• Download | Odin3 v3.10.7

Root Galaxy Grand Prime SM-G530H

1. Download the TWRP and SuperSU files for your Galaxy Grand Prime.
2. Transfer the SuperSU file to your phone�s internal storage and place the TWRP file to your desktop.
3. Now turn off your phone and boot it into the Download Mode. To do this, turn off your device and then press and hold Volume UP + Home + Power buttons simultaneously for 2-3 seconds. When you see the warning screen with a yellow triangle sign, press the Volume Up key to enter Download/Odin mode
4. Download the required Odin.zip file and extract the file on your PC. You will get the Odin3_v3.10.7.exe file. Open it as administrator to get to the Odin window.
5. Connect your Galaxy Grand Prime to the computer using the USB cable.
6. When you connect the device, the ID: COM port on Odin will turn Blue. You�ll also see �Added!!� message to indicate successful connection.
   
7. In case your phone is not detected by Odin, you can try the following things:
   • Reboot your phone and turn off USB Debugging and turn it on again.
   • Try reinstalling the Samsung USB Drivers.
   • Try changing the USB cable and connecting to other ports.
8. Now click AP button on Odin and add the firmware file (TWRP-SMG530H.tar).
   
9. In the Options section, make sure that only the Auto Reboot and F. Reset Time boxes are checked, and everything else is unchecked. (Do not, in any case, check Re-Partition box)
10. Now, click the Start button on Odin and the TWRP installation will begin which may take a few minutes.
11. Once you get a PASS! message on Odin, your device will restart. It�s the green signal that indicates a successful installation. In case you get Fail! The message, make sure you have gone through the preparations carefully.
12. Now detach the USB cable from your Galaxy Grand Prime and power off the phone.
13. Now boot into the custom recovery. Press and hold the Volume Up+Home+Power buttons at the same time for a few seconds to boot into the TWRP recovery, that was just installed on your device.
14. Tap the Install button in TWRP and navigate to SM-G530H-SuperSU-v2.46.zip.
15. Select it and swipe the confirmation slider button at the bottom to flash the SuperSU package.
16. When the installation is successful, reboot to system.